Low-density polyethylene LDPE 2426K is a synthetic resin using a high pressure process via free radical polymerization of ethylene and
is therefore also called “high-pressure polyethylene”. Since its molecular chain has many long and short branches, LDPE is less
crystalline than high-density polyethylene (HDPE) and its density is lower. It features light, flexible, good freezing resistance
and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt,
excellent electrical insulation properties. Its vapor penetration rate is low. LDPE has high fluidity and good processability. It
is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow
molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding
crystalline than high-density polyethylene (HDPE) and its density is lower. It features light, flexible, good freezing resistance
and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt,
excellent electrical insulation properties. Its vapor penetration rate is low. LDPE has high fluidity and good processability. It
is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow
molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding
LDPE Specification
LDPE Injection Grade
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 15 | g/10min |
| Density | 0.922 | g/cm3 |
|
Tensile Yield Strength |
7 | Mpa |
|
Elongation at Break |
75 | % |
| Wien Softening Point | 85 | °C |
LDPE film grade
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 2 | g/10min |
| Density | 0.9225 | g/cm3 |
| Tensile Strength | 9 | Mpa |
| Elongation at Break | 500 | % |
| Fish eye max(0.3-2mm) | 30 | n/1200cm2 |
| Stripes | 20 | cm/20m3 |
Application LDPE 2426K :
1. LDPE is principally used for making films. It is widely used in the production of
– agricultural film (mulching film and shed film),
– packaging film (for use in packing candies, vegetables and frozen food),
– blown film for packaging liquid (for use in packaging milk, soy sauce, juice, bean curds and soy milk),
– heavy-duty packaging bags,
– shrinkage packaging film,
– elastic film,
– lining film,
– buildinguse film,
– general-purpose industrial packaging film and food bags.
2. LDPE is also widely used in the production of wire & cable insulation sheath. Cross-linked LDPE is the main material used in
the insulation layer of high-voltage cables.
3. LDPE is also used in the production of injection-molded products (such as artificial flowers, medical instruments, medicine and
food packaging material) and extrusion-molded tubes, plates, wire & cable coatings and profiled plastic products.
4. LDPE is also used for making blow-molded hollow products such as containers for holding food, medicine, cosmetics and chemical
products, and tanks.
– agricultural film (mulching film and shed film),
– packaging film (for use in packing candies, vegetables and frozen food),
– blown film for packaging liquid (for use in packaging milk, soy sauce, juice, bean curds and soy milk),
– heavy-duty packaging bags,
– shrinkage packaging film,
– elastic film,
– lining film,
– buildinguse film,
– general-purpose industrial packaging film and food bags.
2. LDPE is also widely used in the production of wire & cable insulation sheath. Cross-linked LDPE is the main material used in
the insulation layer of high-voltage cables.
3. LDPE is also used in the production of injection-molded products (such as artificial flowers, medical instruments, medicine and
food packaging material) and extrusion-molded tubes, plates, wire & cable coatings and profiled plastic products.
4. LDPE is also used for making blow-molded hollow products such as containers for holding food, medicine, cosmetics and chemical
products, and tanks.
Reviews
There are no reviews yet.